Jaguar I-Pace EV400 Forum banner
1 - 5 of 5 Posts

·
Registered
Joined
·
1,169 Posts
Discussion Starter · #1 ·
So it appears that when you set a seat memory and recall it only the front back and tilt gets restored, NOT the height and seat angle for front nor the side mirror positions, is this what others have also found? If this is normal it would be VERY weak for any car with driver and passenger memory option (specially the mirrors). Both drivers were using the same key fob. The seat memory was manually recalled.

Or is this a weirdness of the profiles as I have created one? I haven’t had a chance yet to try switching profiles to see if its a part of that. I wish there was a detailed list of what is “saved” under what “feature” of the car.

Any input or experience from owners?
 

·
Registered
Joined
·
1,169 Posts
Discussion Starter · #2 ·
Ok to answer part of my own question: so the seat and mirrors are saved MORE as part of user profile than seat memory, using profiles and configuring the seats/mirrors restores the settings. I am not sure if they still need to be saved in a specific memory or not, that is not clear and honestly pretty confusing for most. Will report more when I have the guts to experiment with profiles...
 

·
Registered
Joined
·
1,169 Posts
Discussion Starter · #4 ·
The iguide isn't very clear on the profile and seat memory as there is nowhere in the Profile to indicate if you prefer Memory 1, 2, or 3 be assigned to the profile. I'm not sure how Profile learns your preferred seat settings. Seems like most things we'll have to do some personal testing and sharing to get a better picture of what to expect.
Yup and I'll definitely will test more as I have time, like I am testing now whether ambient lighting stick to profile. I am guessing that profile hold WHATEVER you do while they are active (or so I hope), but I don't know if there are DIFFERENT banks of seat memory PER profile (so what I mean if there is profile A and B is there an A1/A2/A3 memories for seat and B1/B2/B3 or there are only global 1/2/3). Also I am not sure if profile RECALLS whatever memory you used in that profile OR has its own configuration of seat OUTSIDE of the seat memories (another test).

But I have to try to save/export a profile before I test as I already had one disappear and it took 20 minutes to remember and re-set all the various parameters.

But it seems like it is a GREAT idea to start car, wait until boot is complete (sigh) then ALWAYS make sure the profile you want is active BEFORE you make changes.
 

·
Registered
Joined
·
1,169 Posts
Discussion Starter · #6 ·
Ok on that note is it me or is it really outdated that when I use voice guidance I have to spell out the address rather than read it out loud?

I posted this elsewhere too, but the profile seems to be a capture of the entire "state" of the car, although sometimes it decides it should turn on my wheel heat because I had it on, and other times at same temperature it decides NOT to (same profile). So it definitely is either much smarter than me or much dumber than me.
 
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top