Jaguar I-Pace EV400 Forum banner

Any way to refresh/re-connect car's built in 4G?

2K views 5 replies 3 participants last post by  Deutsch100 
#1 ·
I live in a canyon, and when parked at home my I-Pace's 4G is active and shows on the main screen. Once I drive away from my house, the 4G dies and the 0 with a / symbol replaces the 4G symbol.

The 4G service will NOT reestablish unless I turn the car off, even when I re-enter an area with reliable 4G.

Once I turn the car off, the 4G comes back and all is good. But, if I am driving (can be 10 mins or 2 hours)...the 4G will not come back unless I turn the car off.

Anyone figure out a fix around this? Thanks so much.
 
#3 ·
Assuming you're referencing the 4G (or 3G or 2G or E) symbol seen in the upper right of the touch panel, try this:
Touch the "gears" setting symbol along the bottom of the touch panel
Touch "All settings"
Touch "Connectivity"
Touch "Mobile data"
Toggle that to off then on, respond to any agreement prompt, and set any other choices you want about data usage and roaming.

BTW, that's a G with / through it.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top