IPace Technical issues Car won’t creep going from P to D or R sometimes. - Jaguar I-Pace EV400 Forum
 
LinkBack Thread Tools
post #1 of 9 (permalink) Old 04-08-2019, 12:10 PM Thread Starter
Junior Member
 
Abs2780's Avatar
 
Join Date: Mar 2019
Posts: 18
IPace Technical issues Car won’t creep going from P to D or R sometimes.

So my car is at the dealer in Sacramento, it had a update on the infortainment system and when I took it I told them of some of the things I noticed.

So the creep mode is on, but the car won’t roll going from Park to Drive or reverse at times. Not always sometimes. If you tap the speed slightly the break releases and it starts to move again.

We tried it at the dealer and when it went from park to drive it felt like the car is trying to move but the breaks were holding on to it and than my break lamp would come on, even though the car was on Drive. If I tap the speed a little it released and moved? I didn’t think that was normal and the dealer agreed. It’s been with them for 3 days now and they can not seem to figure that out.

Anyone else noticed this issue or similar?
Abs2780 is offline  
post #2 of 9 (permalink) Old 04-12-2019, 01:43 AM Thread Starter
Junior Member
 
Abs2780's Avatar
 
Join Date: Mar 2019
Posts: 18
My car has now been at the dealer for 8 days and they still don’t know what’s causing the car not to move smoothly from park to drive and start to roll on creep mode. I asked the dealer to test other I Pace they have to see if it does the same thing. Maybe it’s just the way it is suppose to perform, but no answer from dealer. They waited 2 days for their engineers to respond on what they should be doing, which made me upset that 2 days for a respond on what they should be looking at on a brand new car.
Abs2780 is offline  
post #3 of 9 (permalink) Old 04-12-2019, 05:53 AM
Senior Member
 
Join Date: Nov 2018
Location: Central Florida
Posts: 302
Quote:
Originally Posted by Abs2780 View Post
My car has now been at the dealer for 8 days and they still donít know whatís causing the car not to move smoothly from park to drive and start to roll on creep mode. I asked the dealer to test other I Pace they have to see if it does the same thing. Maybe itís just the way it is suppose to perform, but no answer from dealer. They waited 2 days for their engineers to respond on what they should be doing, which made me upset that 2 days for a respond on what they should be looking at on a brand new car.
I have had resistance at times with creep mode in reverse, but only exiting my garage. It seemed like the sensors were detecting nearby obstacles I had to give the accelerator a bigger nudge. However, I donít recall it holding onto the electric brake as you described.

I stopped using creep mode about 4 weeks ago and havenít had any issues with forward and reverse.

The interaction with the sensors is just a guess. Please keep us posted.

2019 I-Pace EV400 SE
Firenze Red - Ebony/Ebony
Driver Assist Pack
Black Exterior Pack
20" 5 Spoke Style 5068 Gloss Black Wheels
plus a few extras
Sbingham60 is offline  
Sponsored Links
Advertisement
 
post #4 of 9 (permalink) Old 04-16-2019, 02:19 PM Thread Starter
Junior Member
 
Abs2780's Avatar
 
Join Date: Mar 2019
Posts: 18
So my I Pace is still at the dealer for over 2 weeks now. Dealer has seen what the car is doing and agrees that I Pace should move smoothly going from Park to drive or reverse with Creep mode on. The one thing that is concerning is that when when the dealer tested it going from Park to Drive, with creep mode on, the Car tried to roll like normal but it did not, it made scratching noise and the Park light came on. I did not pay attention to the park light coming on but the dealer did on multiple occasions. So they recorded what the car was doing and have sent it to UK for Jaguar engineers to tell them on a fix. Nothing yet the dealer has tested multiple things , such as breaks, batteries and now waiting on UK to decide what to do. The dealer tested other I Pace that were on their lots and all of them did the same thing. I think UK is testing the models out there at this time to see if it’s the same as they asked for the dealer to record a video and send it to them.

Does anyone hear little squirrels, like the suspension making noise when moving from Park?
Abs2780 is offline  
post #5 of 9 (permalink) Old 04-17-2019, 09:15 AM
Member
 
Join Date: Jul 2018
Location: Northern NJ
Posts: 56
I have a similar issue. I just have to wait a second when I change gears F to R and vs versa and the emergency brake releases and it will start to creep again. Small issue that's not driving me crazy.
Katatonic is offline  
post #6 of 9 (permalink) Old 04-17-2019, 12:37 PM
Senior Member
 
Join Date: Nov 2018
Location: Central Florida
Posts: 302
Sorry Abs2780, I don't hear any odd sounds. Normally the only sound I hear is the air suspension changing the drive height, but that is more of a short "chunk" sound from the suspension change.

2019 I-Pace EV400 SE
Firenze Red - Ebony/Ebony
Driver Assist Pack
Black Exterior Pack
20" 5 Spoke Style 5068 Gloss Black Wheels
plus a few extras
Sbingham60 is offline  
post #7 of 9 (permalink) Old 07-03-2019, 08:43 PM
Junior Member
 
Join Date: Feb 2019
Posts: 17
With Creep turned OFF: I've noticed the I-pace seems to have a soft "park" mode if I'm stopped at a traffic light. A small blue sign on the dash will say "park"... and another sign that says "ready". If I let go of the break
it won't roll. I also notice that if I'm parked facing up a hill it won't roll backwards after stopping but it has no problem rolling forward if I'm stopped facing down a hill.

It gets really tricky when you try to enter one of the car washes that pulls your car through using a roller next to your front wheels. I always have to tap the accelerator slightly to get it to unlock the wheels.
and then I'll press and hold both mirror buttons to get them to retract. hot tip of the day.





Quote:
Originally Posted by Abs2780 View Post
So my car is at the dealer in Sacramento, it had a update on the infortainment system and when I took it I told them of some of the things I noticed.

So the creep mode is on, but the car wonít roll going from Park to Drive or reverse at times. Not always sometimes. If you tap the speed slightly the break releases and it starts to move again.

We tried it at the dealer and when it went from park to drive it felt like the car is trying to move but the breaks were holding on to it and than my break lamp would come on, even though the car was on Drive. If I tap the speed a little it released and moved? I didnít think that was normal and the dealer agreed. Itís been with them for 3 days now and they can not seem to figure that out.

Anyone else noticed this issue or similar?
glennsmooth is offline  
post #8 of 9 (permalink) Old 07-03-2019, 08:57 PM
Senior Member
 
McRat's Avatar
 
Join Date: May 2018
Location: Norco, California, USA
Posts: 1,326
Both Creep On and Creep Off are buggy in some instances.

Every now and then there will be times where you will want to set or release the Parking Brake to insure the car behaves. Know where the lever is and practice using it.
One of the methods to leave your car 'running' is to put it in N, and manually set the parking brake. The car will not turn off when you exit.

Jaguar i-Pace FE Photon Red 20" wheels, "Leaper"
Two Chevrolet Volts in service
24.2 kW x 480v 3ph solar array self-installed.
McRat is online now  
post #9 of 9 (permalink) Old 07-03-2019, 09:30 PM
Senior Member
 
Join Date: Apr 2019
Location: Middle OH, USA, Earth
Posts: 134
The little blue sign is telling you it is ready to do parking assist if you want to park the car. The READY light just means it is at a stop and it is ready to be driven.

One should put it in Neutral if going through such a car wash. The owners manual says to that automatic car washes "are not recommended."

Yes, it does have a feature to prevent roll-back, although I have to engage with the brake pedal on some slopes.

My experience, high regen, and one-foot driving style:
Coming to a level stop has no problem engaging the brake.
Coming to a stop light with a slight nose-high slope will engage the brake after a little roll-back.
Coming to a stop light with a steeper nose-high slope requires human foot assistance to engage the hill holding brake action.
Coming to a stop light with any nose-down slope will not engage the brake and human foot assistance is required until ready to proceed.

These features are covered in the owner's manual/iGuide. I suggest reading it and loading the iGuide onto a smart phone. iGuide has a decent search function to find this information.
Ayepace is offline  
Reply

Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page



Posting Rules  
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome